Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black
Lane Splitter ECE R22.06 Helmet - Gloss Black

Lane Splitter ECE R22.06 Helmet - Gloss Black

SKU: 1004-101-501
$529.00
FREE SHIPPING OVER $149 IN CONT. USA

SENT
SUCCESFULLY!

We will notify you at the email address when the product is available again.

Only 1 unit left
Size:X-Small
Size Chart & Install Guide

Lane Splitter was the first Biltwell helmet engineered to meet Europe’s comprehensive motorcycle safety standards a decade ago. Today, our feature-rich helmet for high-performance riders is ECE R22.06 certified to ensure high levels of rider safety and protection.

 

Size Chart & Install Guide

Lane Splitter ECE R22.06 Helmet - Gloss Black

TECH SPECS
FITMENT
  • Injection-molded ABS outer shell is lightweight and highly resistant to impacts
  • Aggressively styled shell features front, side, and rear ventilation to improve interior airflow, moisture dissipation, and cooling
  • New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
  • Removable BioFoam spoiler on underside of chin bar reduces turbulence below the rider’s face
  • Molded urethane chin bar pad dissipates energy during front impact
  • Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
  • CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
  • Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
  • Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
  • Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
  • New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
  • Molded EPS ear pockets fit select aftermarket audio accessories
  • US DOT FMVSS No. 218 compliant / ECE R22.06 certified
  • ⚠️ WARNING: This product can expose you to chemicals including Phthalates, which are known in the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
  • ⚠️ WARNING: This product can expose you to chemicals including Lead and Cadmium, which are known in the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. To meet Europe's new, more robust standards for impact attenuation and rider safety, ECE R22.06-certified helmets may fit you more snugly than similar US DOT-compliant models. NOTE: We offer accessory cheek pads so you can fine-tune the comfort of your helmet against your cheeks and face for a perfect fit.Click herefor details on customizing the fit of your Biltwell helmet.